"(《世界人权宣言》) printing paper coefficient of friction test plays a crucial role in ensuring smooth operation across printing presses, copiers, and other paper-handling machines. This test evaluates how easily one sheet of paper slides over another, directly impacting print quality, sheet feeding accuracy, and processing speed. According to TAPPI T549, a standardized horizontal plane method is used to determine both the 天电 和 kinetic coefficient of friction (COF) for uncoated writing and printing papers.
For producers, converters, and quality control professionals, understanding and performing this test correctly not only ensures performance compliance but also helps reduce waste and equipment malfunctions. In this guide, we explain the standard method, instrumentation, and highlight how Cell Instruments’ paper COF testing machine delivers reliable, repeatable measurements.
Importance of the Coefficient of Friction in Printing Paper
"(《世界人权宣言》) 摩擦系数 is a fundamental property describing the resistance encountered when one surface slides over another. In printing applications, the COF of paper affects sheet separation, alignment, and feeding. A too low COF may cause sheets to stick together, leading to double-feeding, while a too high COF could result in jamming or misfeeds. Hence, controlling this parameter is essential for consistent and efficient print production.
Recommended Equipment: Paper COF Testing Machine
To perform a precise printing paper coefficient of friction test, a paper COF testing machine is required. The Cell Instruments friction tester is specifically designed for this purpose, offering:
- Horizontal plane measurement system
- Adjustable test speed (150 ± 30 mm/min)
- High-sensitivity force sensors (resolution of 0.01 N)
- Configurable test sled mass (typically 200 ± 5 g as per TAPPI T549)
- Integrated software for real-time COF calculations
This equipment ensures accurate and repeatable measurement of both 天电 和 kinetic friction under standardized test conditions.
Standard Test Method Overview (TAPPI T549)
Specimen Preparation:
- Use either ream or roll samples (lift samples).
- Identify machine direction and cut specimens accordingly (100 × 215 mm and 75 × 130 mm).
- Ensure clean, undamaged edges and consistent sample stacking.
测试设置：
- Place the longer specimen on a leveled horizontal plane.
- Position the smaller specimen on top and place the rubber-faced 雪橇 (with specimen attached if needed) over it.
- Connect the sled to the pulling mechanism of the paper COF testing machine.
- Start motion at a consistent speed and record two measurements:
- 静态 COF: Maximum initial force needed to start movement
- 动能 COF: Average force required to maintain movement over ~130 mm
Calculation:
- 静态 COF = (Force to initiate motion) ÷ (sled weight × 9.80665)
- 动能 COF = (Average sliding force) ÷ (sled weight × 9.80665)
These are dimensionless values and reflect the frictional characteristics of the paper in both motion states.
Testing Conditions and Sampling Protocols
Following TAPPI T402, samples should be conditioned in a controlled environment (temperature and humidity) before testing. This ensures that ambient factors do not alter the COF values.
Sampling should be statistically representative of the entire paper batch, and specimens must be tested in both the machine 和 cross-machine directions to fully evaluate friction behavior.
Applications and Significance in the Printing Industry
Reliable printing paper coefficient of friction test results ensure that:
- Sheets feed smoothly into presses or copiers
- There is minimal risk of paper jams or misfeeds
- Double-feeding is reduced due to proper static COF control
- Paper finishes and coatings are optimized for friction balance
These benefits translate to improved throughput, reduced downtime, and consistent print quality.
Why Choose Cell Instruments?
细胞仪器 offers a robust and precise paper COF testing machine designed for laboratory and production environments. With intuitive operation and compliance to TAPPI T549, our instruments provide dependable measurements essential for quality assurance in the printing and paper converting industries.
Whether you are testing uncoated writing paper, glossy photo paper, or other substrates, Cell Instruments ensures accurate COF evaluation and full support for standards-compliant testing.
Conclusion
"(《世界人权宣言》) printing paper coefficient of friction test is a vital tool for evaluating paper performance and preventing handling issues in printing applications. By following the TAPPI T549 method and using a reliable paper COF testing machine like the one offered by Cell Instruments, you can ensure consistent quality, improve processing efficiency, and optimize material performance.
繁體中文 
English 
Español 
Deutsch 
العربية 
Bahasa Indonesia 
Português 
Русский 
한국어 
日本語 
עִבְרִית